LL97 Compliance Calculator

Look up a building by address to load its publicly reported energy data, or enter your own utility figures. See your carbon emissions, compliance status across all three penalty periods, and your annual fine exposure.

Step 1: Find Your Building

Search by street address to auto-fill from NYC's public LL84 benchmarking database. Or skip to Step 2 and enter manually.

Step 2: Building Information

Total floor area including all stories, measured to exterior walls

Step 3: Annual Energy Consumption

Enter actual annual figures from utility bills. Leave blank if not applicable.

kWh
therms
MMBtu
gallons
gallons

Step 4: Utility Rates (Optional, for cost comparison)

Entering rates adds a comparison of LL97 penalties against annual energy cost. There are two ways to enter them:

  • From your utility bills: Enter the $/kWh from your electric bill, $/therm from your gas bill, or $/gallon from your fuel oil invoice.
  • Use NYC averages: The button below fills in typical NYC commercial rates for a quick estimate.
$/kWh
$/therm
$/MMBtu
$/gallon
$/gallon
Period 1: 2024–2029
Your Annual Carbon Emissions
Emissions Intensity (per sq ft)
Your Allowable Limit
Excess Emissions
Estimated Annual Fine

For a full compliance assessment, including reduction strategies, incentive opportunities, and a multi-year capital plan, contact us.

Talk to an Advisor →
Disclaimer: This tool provides a simplified estimate using publicly available LL97 carbon factors and limits. If pre-filled from LL84 data, figures reflect self-reported benchmarking and may not match current consumption. Results are for informational purposes only and should not be relied upon as legal or compliance advice. Building-specific factors, RECs, adjustments, and rule amendments may affect actual obligations.